Related Products
- Automatic push-button calibration.
- Precise filter selection.
- Internal voltage stabilization.
- Computer interfacing.
- Manufacture: Herzog
- Model: HTP40
The standard for pellet preparation- designed for requirements of laboratory operations
AREA OF APPLICATION
Use
Preparation of pellets in steel rings (40 or 51. 5 mm diameter), aluminium cups or free pressing for x-ray fluorescence spectroscopyMaterial
Different materials, raw meal, clinker, cement, slag, ores, oxidic material, ferroalloys (feed size 100µm)Operation mode
Semi-automaticADVANTAGES
Optimized for laboratory operations
The HERZOG pellet press HTP offers the full benefits of program-controlled sample preparation for x-ray fluorescence analysis. Pelletizing with the HERZOG HTP significantly increases reproducibility and accuracy of sample preparation. The HTP pellet press is a high-quality, precision engineering product with compact dimensions. It is ideally suited for laboratory requirements.Optimum quality of pressed pellets
The HERZOG hydraulic HTP press produces high-quality pressed pellets with a mirrorlike surface necessary for optimal XRF results. The HSM achieves the desired homogeneity and stability of each individual pellet with a maximum of reproducibility. The HTP 40 reaches press forces of 400 kN, the HTP 60 of up to 600 kN even with larger sample diameters.Easy handlingA swing-out cross-head makes filling and cleaning of the die quick, simple and safe. A number of pressing variables can be selected, depending on the press tool employed. Precision press tools with a range of diameters and materials permit free pressing, pressing in aluminum shells, and pressing in steel rings.
Precise control of the pelletizing process
The pelletizing process of the HTP is controlled by the PLC program. This leads to substantial improvement in reproducibility of sample preparation and consequently more precise analysis results. Pelletizing parameters such as total pressing force, incremental increase and decrease of pressure as well as pressure holding time can be preset on the HMI panel. The pressure increase and decrease during pelletizing are controlled to reduce inner stresses within the sample. This allows the production of perfect pellets even with complicated sample material.- Manufacture: IEC
- Model: K
- Hp: 3/4
- Hz: 60
- Volts: 115
- Amps: 7
An automatic timer
Dynamic electric braking
Swivel casters to permit easy mobility
Precise run times from 2 to 120 minutes in 2-minute increments
A manual mode for unlimited runs, via use of the timer
Gentle deceleration which cuts coasting time in half and help prevent resuspension
Steel cabinet has removable access plates and four locking swivel casters
Operating speeds range from 1,200 to 5,500 rpm
380xG to 4,420xG respectively, depending on the heads and shields used.
- Manufacture: Stir-Pak
- Model: 50002-30
- 23-2300 RPM
- Cole Parmer Instrument Co.
- Manufacture: Lorentzen & Wettre
- Serial Number: 2287
- Manufacture: Lorentzen & Wettre
- Type: Tensile Tester
- Manufacture: Pulmac
- Type: Automatic Sheet Former
Pulmac MS-B3-115V Shiv Analyzer
Product id: PC13755
Description: Manufacture: Pulmac Model: MS-B3-115VTechnibrite TB-1 Economical and Easy to Use ISO Brightness Tester
Technibrite TB-1 Economical and Easy to Use ISO Brightness Tester
Product ID: PT9015
ISO Brightness
Providing outstanding performance even in the most hostile pulp, paper, and clay mill environments, the Technibrite TB-1 is the industry leader for measuring and controlling ISO brightness. With strict adherence to industry standards, this no-nonsense testing device is economical and user-friendly.
Meets the following industry standards:
TAPPI Test Methods T525, T534
ISO Standards 2469, 2470, 2471, 3688,12625
Product id: PT9015
Description: ISO Brightness Providing outstanding performance even in the most hostile..Herzog HTP40 Semi-Automatic Pellet Press
Herzog HTP40 Semi-Automatic Pellet Press
Product ID: PM13177
Product id: PM13177
Description: Manufacture: Herzog Model: HTP40 The standard for pellet preparation- designed..International Equipment Company – IEC – model K Centrifuge, 3/4 hp
International Equipment Company – IEC – model K Centrifuge, 3/4 hp
Product ID: PT8825
The IEC model K floor model centrifuge is a heavy duty, large capacity machine designed for high speed with constant or intermittent use. The IEC model K is a G-testing machine designed for use by the electronic Industry. Designed for production sampling and research.
Features:
Product id: PT8825
Description: Manufacture: IEC Model: K Hp: 3/4 Hz: 60 Volts: 115..Stir-Pak Laboratory Mixer Model 50002-30
Stir-Pak Laboratory Mixer Model 50002-30
Product ID: PM12689
Product id: PM12689
Description: Manufacture: Stir-Pak Model: 50002-30 23-2300 RPM Cole Parmer Instrument Co.Lorentzen & Wettre 963376 digital tear tester, autoline compatible
Lorentzen & Wettre 963376 digital tear tester, autoline compatible
Product ID: PM12304
Product id: PM12304
Description: Manufacture: Lorentzen & Wettre Serial Number: 2287Lorentzen & Wettre tensile tester
Lorentzen & Wettre tensile tester
Product ID: PM12643
Product id: PM12643
Description: Manufacture: Lorentzen & Wettre Type: Tensile TesterPulmac ASF Automatic Sheet Former
Pulmac ASF Automatic Sheet Former
Product ID: PM12640
Product id: PM12640
Description: Manufacture: Pulmac Type: Automatic Sheet Former